686A Tan - current sources, Gillespie and others?

[Adamlee]

Hey, which vendors are current with their stock of 686 Tan? Anybody know?

From what I've heard, Gillespie is the paint to go with. BTW, this would be in gallon increments for a paint sprayer NOT rattle-cans.!

Thank you!

 

[steelsoldiers]

Mark at RAPCO stocks it as does George at Army Jeep Parts. I'm sure there are others. I have had good luck with the GC Tan paint in the past.

 

[emmado22]

www.milspray.com

 

[steelsoldiers]

Cool site, Mark. I plan on painting my next truck in the water-based CARC from Sherwin Williams. I have used the solvent based CARC before and it does a nice job, but water-based would be so much easier to thin and clean up.

 

[Green_gator]

Here is the link to the Sherwin Williams paint. I went by my local store yesterday and they quoted me $85/gal for the green, single component CARC and they have it and the primer in stock. http://www.sherwin-williams.com/oem/us/eng/products/mildtl53039b_type_i/

Since they stock it I also skip the shipping and hazmat fees.

 

[1stgear]

I got 2 gallons of the 383 CARC Green from Rapco. Great paint and easy to spray (was my first time too). Delivered to my door the 2 gallons were $110. I think I got the paint 2 days after ordering too.

 

[Adamlee]

tan 686A

Here is the link to the Sherwin Williams paint. I went by my local store yesterday and they quoted me $85/gal for the green, single component CARC and they have it and the primer in stock. http://www.sherwin-williams.com/oem/us/eng/products/mildtl53039b_type_i/

Since they stock it I also skip the shipping and hazmat fees.

Thanks for that helpful link, Walter!

Adam