• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

809 series generation changes

Jones

Well-known member
2,237
83
48
Location
Sacramento, California
There have been a1's and a2's within the M809 series family. Specifically the 809 truck chassis and M809a1 tractor. M812 truck chassis and M812a1 Floating Bridge Transporter. M813 Cargo Truck and M813a1 Cargo Truck with drop-sides. M820 Expandable Van Truck and M820a2 Expandable Van Truck.
Is that what you had in mind?
 

Capt.Marion

Active member
1,811
15
38
Location
Atlanta, GA
The closest would be from XM designation to M- designation as they shifted to full contract production, and then the A1 ISO-bed equipped trucks, but there were no major changes, as in powerplant or structural changes. Until the 939 series, that is.
 

DDoyle

Well-known member
Supporting Vendor
1,825
80
48
Location
West Tennessee
As others have pointed out, they began as XM, then went to M, and along the way the grille changed. Makers changed too.

Just to clarify, the A1, A2 suffix as on the G-742 series trucks really has nothing to do with generations of the truck chassis. For example, the M109A3 is powered by the Multifuel, whereas the M35A3 is powered by the Cat.

Rather the suffix denotes a variation from the base vehicle.

Hope this helps,
David Doyle
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks