• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

a/c hose install

mrfarb

Active member
88
164
33
Location
Texas
So I’m ready to install the new a/c hose. It runs over top of the transmission and transfer case (basically attached to the tunnel) - edit: it’s done! Was able to snake it through without too much trouble. Well, it didn’t go easy, but it’s in. Now waiting in the new drier and then I can see if it holds a vacuum.
 
Last edited:

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,930
9,587
113
Location
Papalote, TX
Dropping the trans would be allot easier than lifting the body.
So I’m ready to install the new a/c hose. It runs over top of the transmission and transfer case (basically attached to the tunnel) - edit: it’s done! Was able to snake it through without too much trouble. Well, it didn’t go easy, but it’s in. Now waiting in the new drier and then I can see if it holds a vacuum.
I would think dropping the trans would be easier than lifting the body.
 
Top