Air cleaner

[CES 3245th]

[h=1]

Ithought I would throw this question out, aswell looking for pros or cons on this product. Has anybody used this AIRCLEANER CUSTOM KIT from Those Military Guys website?
[/h]

 

[Brutacus]

I have. It seems to let my engine breath better. I have a nhc 250 in my M818. The engine idles smoother, and has slightly better throttle response. I don't know if there is more power or not, but overall the engine breathes better with the smaller diameter filter.

 

[CES 3245th]

Thank you for your input
.So did you buy your set up from those military guys website?

　Once again thank you

 

[Brutacus]

Yeah, I got mine from those military guys. I waited until they had a free shipping and 10 percent off sale. They do stuff like that from time to time.

 

[simp5782]

Since you have a nhc250 if you want more power it is best to fix an intake on the inner fender well and use the black out light area for forced air flow. I have an 8in grated opening that flows 40,000cfm of air at 55mph. With a high flow filter rated for 1100cfm she gets more air than she wants which really boosts your power. Also allows you to bump the fuel up

Sent from my SM-G935P using Tapatalk

 

[CES 3245th]

Thanks for the info
! To have any pictures showing the configuration of what you did to tie in?

 

[CES 3245th]

So let me ask you this
, if you had to buy it again would you do it? And did it make a difference and worth the money that it cost?

　
thanks once again

 

[Brutacus]

Since you have a nhc250 if you want more power it is best to fix an intake on the inner fender well and use the black out light area for forced air flow. I have an 8in grated opening that flows 40,000cfm of air at 55mph. With a high flow filter rated for 1100cfm she gets more air than she wants which really boosts your power. Also allows you to bump the fuel up

Sent from my SM-G935P using Tapatalk

I don't think i have the room on my truck to do what you did to yours Wes. Not a lot of room under the hood of my m818 compared to your M923A0. I still like your setup, and have considered mounting another air filter drum on my passenger side fender, tying it in to the intake from the driver side to form a dual 5 inch intake system with some ram air scoops on top of my drums. And Yes CES 3245th, If I where to do that, I would get another one of the filter kits from those military guys. I think it's a worth while modification, which is cheap, and easy to install.

 

[simp5782]

I don't think i have the room on my truck to do what you did to yours Wes. Not a lot of room under the hood of my m818 compared to your M923A0. I still like your setup, and have considered mounting another air filter drum on my passenger side fender, tying it in to the intake from the driver side to form a dual 5 inch intake system with some ram air scoops on top of my drums. And Yes CES 3245th, If I where to do that, I would get another one of the filter kits from those military guys. I think it's a worth while modification, which is cheap, and easy to install.

The OP has a 923A1. The 809 trucks get enough air where they are at.

Sent from my SM-G935P using Tapatalk

 

[big block 88]

I didnt buy the kit. I judt cut back the inner flange that surrounds the filter. If you look up inside the air box you will see there is a shield surrounding the air filter and blocking the direct air flow path of your snorkel i cut that shield back anf noticed better response. So i wouldnt spend that kind of money on the tmg kit....