Air connector inside the cab

[ktm380]

I can't find any info on this. Where can I find one of these things or would it be better to change it out with a normal air fitting?

 

[mangus580]

just use a normal air fitting, makes it easier for you to hook things up.

 

[h1crwchf]

regular fitting

Change it out with a normal air fitting, makes things much easier!

 

[Recovry4x4]

All it is is a ball valve with a coupling and a plug. Screw a quick connector in there and your'e done

 

[73m819]

i just put a quick disconnect on the end of my top air tank, its a lot easer to get to then get under the dash

 

[Boatcarpenter]

I put a mini regulator and then a quick disconnect fitting on a glad hand to hook up to the emergency air at the rear of the truck. Keep the regulator at 50 PSI, makes it real easy to hit all the tires to make sure they are all up to pressure.

 

[ktm380]

Where could I find a "gland hand". I did a search and never found what I was looking for.

 

[poppop]

Any truck parts store and my local NAPA store has them.


Lloyd Strickland
Brooklet Ga.

 

[ktm380]

I'll go to napa in the morning and see what they have. They love it when I walk in, they get thier books out right away and start searching for me.

 

[Recovry4x4]

Just about any fair truckstop will have the air hose/gladhand on hand ready for use.

 

[FSBruva]

ktm380-

Not sure if this info is needed anymore, but I just picked up a glad hand for $4 at Napa - Part # PHI12008.

Matt

 

[ktm380]

Yes thanks, haven't had the time to make it there yet and having the part number will save alot time.