Air fittings at the 3 valves in the driver wheel well ?

[1951M1078]

So I got my missing valve ( front left ). # are 3/8" hose and one is 1/2" hose. The valve assemble was missing the hose fittings caps,ferrell and crunch tubes. So I went to my Weather-Head stuff. The 1/2" is fine but the 3/8" have a different thread than my Weather-head ?



Can anybody tell from the markings ?

Thanks, Randy

 

[Suprman]

I can look on the truck it came off for the caps

 

[1951M1078]

Going to Hose Power Wednesday to see what I can find. To tell you the truth I didn't know their could be different kinds ?

If you get a chance that would be great. Thanks, Will.

 

[1951M1078]

Looks like just a buggered up thread.

Got it handled Will. But thanks !

 

[1951M1078]

Just got the word. If its a DOT splice and it does not leak I'm good to go. Cool.

So the plan is to remove the 3/8 " lines from the chassis. Install new lines on the valve and mount it back where it belongs. then I will make the splice to the chassis lines to the new lines from the mounted valve. Simple ! NOT !