- 10,350
- 75
- 48
- Location
- Meadows of Dan, Virginia
Having looked thru the TM 5-6115-275-12 and -25P (SF-10-MD/MEP-018A) and found no further reference to this heater, can somebody shed some light here, please....
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Another 10KW genset question
- Thread starter cranetruck
- Start date
kc8sfq
New member
- 62
- 0
- 0
- Location
- Southern Mich.
Mine has this plate and valve too. The guy I got it from told me that they came from a field laundry unit and the heater was a gas fired water heater. I've never seen the field laundry, so this is just hear-say.
- 10,350
- 75
- 48
- Location
- Meadows of Dan, Virginia
Hmmm...here is a "laundry trailer", which has the 10KW set mounted. I didn't look closely at it, but you are probably correct.
The trailer is now parked in Eureka, Nevada, perhaps Mike Pop can take a look....
The trailer is now parked in Eureka, Nevada, perhaps Mike Pop can take a look....
Attachments
jasonjc
Well-known member
- 5,326
- 289
- 83
- Location
- Gravette Ar.
I've got a PU-619/M. That is 2 10kw gas gen on a M103. 1 has that vale and 1 does not. The set was rebuilt in 81 both gen are date from the 60's.
nf6x
Feral Engineer
- 1,630
- 50
- 48
- Location
- Riverside, CA, USA
I've had a few of those 10kW gas gensets go through my hands (still trying to get rid of a trailer with two of them! 
). As I recall, they all had that heater valve.
). As I recall, they all had that heater valve.