• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Another Part Identification Request

rmesgt

Well-known member
Steel Soldiers Supporter
258
274
63
Location
Grove, Oklahoma
While working on my 1985 M1009, I discovered this thing hiding between the back of the engine and the fire wall. It appears to be a resister but I cannot locate this thing in the -20 or -34 TM's. Can anyone tell me what this does, what it's for, and how does one know if it is working properly?

Strange Part.jpg

If I remember correctly, this thing was connected to a plug that had a purple wire and a purple wire with a red chaser. It was wrapped in ancient duct tape.
 

rmesgt

Well-known member
Steel Soldiers Supporter
258
274
63
Location
Grove, Oklahoma
It is for the "water in fuel" sensor on the stock fuel filter assembly. Good Luck. Be Safe.
I seriously doubt that I will ever be able to stump you with a CUCV related question! Thank God..! and... thank you for your help. I would be sooooo stuck without your help.
 
Top