• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Another potentially stupid question

Diesel Dominator

New member
8
2
1
Location
Golden Valley, Arizona
So... Here I am again, asking out of curiosity

So here's the thing, my friend has an M35a2 in his backyard

It runs fine and all, and oddly enough, hardly any rust

So here's my question

Is it possible to put a replace the shifter with a sequential shifter? if so, has anyone it?

also

What about dogleg gearboxes?

Would any of those fit or be able to be put into a Deuce and a half without changing the Engine, obviously?
 

gringeltaube

Staff Member
Super Moderator
Moderator
Steel Soldiers Supporter
6,986
2,522
113
Location
Montevideo/Uruguay
.......................

also

What about dogleg gearboxes?

Would any of those fit or be able to be put into a Deuce and a half without changing the Engine, obviously?
The manual Deuce transmissions actually are "dog-leg" style transm., in the sense that 1st and REV are placed in a separate, spring-loaded shift rail, to the left of central/neutral position.
Only thing odd would be 5th-OD for the 3053 model, which goes to the right and up - where you would find 3rd gear in any normal "stick-shift", including the Spicer 3052.
 

exhogflyer

Active member
Steel Soldiers Supporter
159
141
43
Location
Albany NY
Not sure what you mean by " sequential shifter" but anything can be done given enough time and money, and a little bit of money as well.
Did I mention money also?
 

rustystud

Well-known member
9,280
2,987
113
Location
Woodinville, Washington
Diesel Dominator, a "sequential shifter" is used on race transmissions. The deuce is not a race car nor is it's transmission anything close to a race transmission. This Spicer transmission is a 1950's design and was originally shifted by "Double-Clutching" . That is a very slow process, not a race design. The first gear in particular is a "Non" synchro gear. It will crash and crush gears if shifted without proper shifting techniques. There is no way, no how, no matter how much money you have, to make this transmission shift like a Corvette.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks