Another S-250 camper build thread

[amgeneral72]

Drove all the way to Tobyhannah Pa. to pick up this wonderful S-250. I needed a larger shelter than the the one i have been using. With this one I can fit a full size mattress for the wife and I. We were previously both sleeping on a twin. Very tight quarters. I have about 30 days before the rally to get her finished. I recovered it on 8/18/15 so I have had it home for a while and have gotten a fair amount of work done already. I will post some pictures I took to try and catch up. Guess I started this build thread a little late ,but better late than never.

So here we go.

Driving home from Pa.


Made it home.
Love the side & rear window.

Easier to move with the tractor

 

[amgeneral72]

Got started removing everything. Im going to save some of the racking to use in building my bed frame. Im sure i can find uses for some of the other pieces as well. If nothing else its all aluminum. Most of the stuff is bolted but a lot was riveted to the walls. Lots of drilling.



Most everything removed.

 

[amgeneral72]

Got the A/C in. Cut out the center of the original box. Mounted the unit and used greatstuff
to insulate it. I had to make some aluminum plates to fit around the unit. Got them sealed and riveted in place. She's not going anywhere.

 

[XchaosX]

I turned my S250 into a camper and used a full size mattress too. I also used the left over aluminum racking to build the bed frame.

 

[M1key]

Earlier this year I too made a camper of sorts from a S250.
Might be helpful to take a peek.

http://www.steelsoldiers.com/showth...x-Camper-quot-M101a2-with-an-S250E&highlight=