ramdough
Well-known member
- 1,554
- 1,729
- 113
- Location
- Austin, Texas
What did you use?
Any links and pictures?
Sent from my iPhone using Tapatalk
Any links and pictures?
Sent from my iPhone using Tapatalk
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Anyone put a lock in their battery boxes?
- Thread starter ramdough
- Start date
ramdough
Well-known member
- 1,554
- 1,729
- 113
- Location
- Austin, Texas
Chucky,
I was looking at the battery box, not side board locks. Any thoughts?
Sent from my iPhone using Tapatalk
- 7,716
- 19,766
- 113
- Location
- Charlotte NC
.
I have a very technical version of a Battery Box Lock in the picture below.
Chain wraps around the frame.
Loop at the air tank drains.
I could upgrade it with some green paint.
Ohhhh and I almost forgot - the locking device design is Patent Pending
Last edited:
Oh i misunderstood thats easy get a big piece of threadall and drill a hole in the center of the battery box bottom put the threadall in the hole put a nut under the box and one on the inside to stand the rod straight up then put a nut and washer near the top of the rod then drill a hole in the lid in the center then slide the lid over the rod put the 2 ears in the back into the slot then lower the lid down over the rod and rest on the washer /nut drill a hole thru the end of the threadall to where you can put a padlock thru the hole so you cant get the lid off
coachgeo
Well-known member
- 5,147
- 3,462
- 113
- Location
- North of Cincy OH
could do this design with strap metal with numerous hinges and locks to bottom plate below tanks.. aka a giant pad lock hasp similar to this
RRaulston
Well-known member
- 227
- 550
- 93
- Location
- Sahuarita, Arizona
Yes, the lock is on the blind side. and no, you can't pull the cable off...
MrMikey4026
Well-known member
- 281
- 417
- 63
- Location
- Eatonville Washington
I don't bother to lock mine up, they are protected by several high speed wireless devices.