axle hub flip or swap?

[green goat]

Has anyone experimented with reversing hubs on a 900A2 series truck? I don't think it will work but not sure. Would the older truck hubs interchange on the A2 axles?

 

[bigjuice69]

on my M945A1 bridge truck it wouldnt work because of the air brakes. I used the spacer and studs from the front axle so i could use hemmet wheels so they looked the same as front

 

[spicergear]

I believe the hubs are not able to be flipped on the 900 series...there have been other threads about this.

 

[green goat]

Thanks for your response. I seemed to remeber reading this somewhere but just couldn't seem to come up with the correct search to find it again. I started pulling my CTIS off yesterday so could put on my new tires and found that two of the valves were full of oil. I figured a seal had failed for this to have happened thought this would be a good time to flip them if possible. Thanks again.

 

[bbf]

i have flip on the early 900 but the 900 with cti you can not

 

[green goat]

Thanks bbf. Any chance you have played swapping A1 hubs onto an A2 axle?

 

[spicergear]

i have flip on the early 900 but the 900 with cti you can not

THAT'S what it was!!!

 

[Derrickl112]

Ill be happy to take all the CTIS parts off your hands if you are removing it...