coreyvan
New member
- 8
- 0
- 0
- Location
- Rio Rancho, NM
I was wondering if anyone knows where to get a rebuild kit for a banks turbo for a 6.2l?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Banks Sidewinder Turbo rebuild kit
- Thread starter coreyvan
- Start date
aebiv
Member
- 69
- 0
- 6
- Location
- Cali/South Dakota
Call Banks 
b4thundr
Member
- 391
- 8
- 18
- Location
- LaFayette, NY
e bay? google?
powerhouseduece
Active member
- 1,440
- 4
- 38
- Location
- Pasadena, Md
Buy a ATS!coreyvan
New member
- 8
- 0
- 0
- Location
- Rio Rancho, NM
The turbo that I have has some side to side movement, but no up and down movement. There is about 20K miles on the turbo. Does it need to be rebuilt?
- 2,479
- 25
- 38
- Location
- Houston Texas
Is there oil leaking into the exaust gas housing? Or the compressor housing? If not then no. It needs .015 of endplay on the nut holding the compressor wheel on. There is probally oil on the compressor side comming from the CDR valve as it is plumbed into the aircleaner box. So make sure that isn't your source. If there is in fact oil on the compressor side.
jwaller
Active member
- 3,724
- 19
- 38
- Location
- Columbia, SC
take it to any turbo rebuild shop and they can fix it for you if it needs it. up and down and side to side play is all the same(lateral) you want to check end play like on a crankshaft and you want almost none. if it's more than 15 thou then you need bearings and maybe more.