• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Bobbed Deuce Brakes - an easy fix for you guys and gals

wehring

Active member
1,375
26
38
Location
Angleton, TX
I just made a plug for the rear brake block that branches the single line to a "Y" for the rear axles. When you Bob a deuce you only need one outlet. 1/2x20 threads and a 45* concave end is what is needed in a plug to fit in the extra port. I could not find one commercially so I just made one out of a stainless allen head bolt.

Be careful removing the old line from the block. Hold the block securely while removing the line or you will snap the block off of the bracket holding it to the frame. :oops: Ask me how I know. Thankfully it was on my engineering unit.

Justin
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks