35Z-SGM
Member
- 39
- 3
- 8
- Location
- East Central, Iowa
I've been through the circuits recently and replaced a bad Gen 1 bulb, after rebuilding a Gen 1, and several fuses, the Glow Plug Relay, and Glow plugs. First symptoms were a flashing Gen 1 light while in operation, Rebuilt the Gen to find same problem, replaced it with a new one and finally charging in the proper green area but now I am blowing Engine Control fuses upon starting. Replaced Glow Plug Relay and all glow plugs since there were about 5 bad ones. Now I have proper charging in the green, starts fine without blowing fuses but I don't have a Gen 1 or Gen 2 light when the key is on. This is probably something simple but after having been through all of the circuits recently my brain is fried and I am hoping someone has a direction to point me in versus going through all of the stuff just done. Thanks in advance!