• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Brake Issue

Angryacres

New member
1
0
0
Location
Petersburg< NY
Hi,
Im new here and noticed a problem with the 813 airbrakes this weekend. They were fine in the fall the last time we ran it. it had more than half a pedal stroke. Now the pedal goes almost all the way to the floor. On startup the air pressure alarm goes off when there is suffificient air pressure on the gauge. I don't know the truck well enough to know where i should be checking first. All air outlets and such seem closed. I would appreciate any input. Thanks
 

clinto

Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
12,596
1,132
113
Location
Athens, Ga.
Have you converted your 813 to air brakes?
 

M813rc

Well-known member
Steel Soldiers Supporter
4,218
3,265
113
Location
Near Austin, Texas
Did you check the fluid in the master cylinder? It has a habit of 'wandering off' if the truck sits for an extended period. If you have a bad wheel cylinder, that is one of the places it wanders off from, and it's not always immediately obvious from a casual look.

Cheers
 

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
325
0
Location
gainesville, ga.
From reading the first post, I would suggest you read the -10 BEFORE you drive the truck again
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks