• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Chirp in the engine

galeo7171

Member
207
1
16
Location
Cumming, Ga
Try not to roll your eyes when I ask this quetion....I have never owned a diesel until now, so I'm still getting used to the noises, the smoke, etc etc etc..
When the m1009 is at idle, I can hear what sounds like chirping noises coming from under the hood. When I give it a little bit of gas, the noise dies out. What noises are normal for these motors (6.2)?
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,179
113
Location
NY
Check the tension and or condition of your V belts.
 

nf6x

Feral Engineer
1,630
50
48
Location
Riverside, CA, USA
One of my new old CUCVs was making a fairly soft chirp/squeak at idle, and it turned out to have a missing vacuum plug. The sound was coming from there, and went away when I plugged the fitting. Your problem is more likely to be a belt or bearing, but I figured I'd throw this out there.

May the 73Y2 be with you!
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks