86m1028
Active member
- 1,687
- 17
- 38
- Location
- Murphy TEXAS
Has anyone used the "clamp less" fuel return lines on the injectors ?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Clamp less fuel return lines
- Thread starter 86m1028
- Start date
timarr
Member
- 364
- 1
- 18
- Location
- PT PLEASANT N.J./ MARTINSVILLE V.A.
Yes, Ive have them on 2 of my trucks, about 23 bucks shipped from auction site. Make sure you buy the german made stuff!
86m1028
Active member
- 1,687
- 17
- 38
- Location
- Murphy TEXAS
Thanks for your input.
Are you able to remove them & reinstall them, or is it a one time use ?
It's funny how you can search this sight, find nothing.
Make a new post, do same search again & find all kinds of info.
timarr
Member
- 364
- 1
- 18
- Location
- PT PLEASANT N.J./ MARTINSVILLE V.A.
I wouldn't make a habit of removing or your going to have to recut end so it will grip.
86m1028
Active member
- 1,687
- 17
- 38
- Location
- Murphy TEXAS
Thanks timarr
I do understand what your saying.
I don't plan on removing them once installed but you know how that goes.
I wasnt familiar with it & didn't know if it was a one time only use.
timarr
Member
- 364
- 1
- 18
- Location
- PT PLEASANT N.J./ MARTINSVILLE V.A.
I have removed to service a injector and it did reseal ,but don't know how many times you can r/r . So much easier then those dam little clamps!
Barrman
Well-known member
- 5,262
- 1,777
- 113
- Location
- Giddings, Texas
I have the German ones from Badger Diesel on 3 of my 6.2 trucks. Great stuff. Call the guy and he will sell it to you by the foot. I had one end of one line that after pulling it off and on about 15 times I had to recut. The rest didn't suffer any. It sure is better than those silly little clamps. I do have a Zip Loc bag with about 2 feet and 4 ends in the glove box of each 6.2 truck just in case now too.
Flingarrows
Member
- 138
- 0
- 16
- Location
- N Central Illinois
I got my IP rebuilt at Badger, Tim, as well as use their lines. Ive had good service with them
Barrman
Well-known member
- 5,262
- 1,777
- 113
- Location
- Giddings, Texas
Having typed what I did yesterday. I of course had a leak today. One of the non clamp end caps came off on my way to work in RED this morning. It is one of the set I got from Badger. I have spares and all is well again. I had another end come off the M715 a few months ago. That is why I carry spares. Just wanted to point out that leaks do happen.