Farnorth
Member
- 44
- 3
- 8
- Location
- Melfort, SK
I'm puzzled how my M923a2 wheel valve assemblies can allow deflation to run in sand mode, yet protect the tire from deflation when a supply line to the axle is removed or damaged?
i have an axle seal that is leaking air, so I removed the line going to that particular wheel, at the axle. I capped the line, and just put a rubber dust plug in the hole where it was. Yet I can inflate the tire with an air hose, and no air comes out the axle where the line came was removed.
Does the wheel valve need to have some pressure on the supply side to allow air out?
i have an axle seal that is leaking air, so I removed the line going to that particular wheel, at the axle. I capped the line, and just put a rubber dust plug in the hole where it was. Yet I can inflate the tire with an air hose, and no air comes out the axle where the line came was removed.
Does the wheel valve need to have some pressure on the supply side to allow air out?