• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Custom intercooler fitment Question

Dr.Hmmwv

New member
4
3
3
Location
NW Arkansas
Has anyone by chance tried using a 03-09 Dodge Ram intercooler on a Hmmwv? I was reading over some Cummins swaps and noticed one mentioned using these dodge ram intercoolers but wasn't sure if they required some custom work or if they fit over the hmmwv factory radiator. I figure the tubing will have to be custom but wondering if the intercooler itself would fit with some custom brackets. Basically wanted to see if someone has tried this before.

Thank You
 

Attachments

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,931
9,587
113
Location
Papalote, TX
I doubt it is wide enough and or you cannot pass the tubes in that direction due to the air lift bars, most I have seen and the one I am using look something like this.
Intercooler.jpg
With the piping passing over the radiator, a body lift is helpful.
If you are adding an intercooler to the OEM Detroit there is a very limited effect, the Detroit turbo at 5-12LB of boost does not heat up the intake air very much, now when you get to say 30-40lb like I am running in the DuraVee is makes a significant difference.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks