Dana 70 closed knuckle front

[citizensoldier]

I am wondering if anyone has the part # for the Warn lockout hubs for a Dodge Dana 70 front closed knuckle axle. Or Super Winch or Silectro? Or maybe has a good set of used ones they would sell? Thanks.

 

[steve6x6x6]

There is 6 bolt and 8 bolt? 23 spline or 35 spline?

 

[Bob H]

Fred & Sally have that front axle on their Dodge Ambulance.
So does the bright red one, but you'll likely get an answer from Fred.

 

[phil2968]

There is 6 bolt and 8 bolt? 23 spline or 35 spline?

I was going to suggest you contact Steve about them. I see he beat me to it! He may be new to the site but not new to axles, he knows his stuff.

 

[ODdave]

Shouldn't they be 23 spline? 35 where mainly in the open knuckles whern't they?.

Had some. called the guy that bought them to see if he still had them. waiting on a call back.

 

[steve6x6x6]

Shouldn't they be 23 spline? 35 where mainly in the open knuckles whern't they?.

Had some. called the guy that bought them to see if he still had them. waiting on a call back.

There was IH, 1300 and 1600 seires that had 35 spline stub axles with 8 bolt locking hubs. I have owen them all, over one thousand dana 60 and dana 70 fronts have been through my shop.

 

[citizensoldier]

There is 6 bolt and 8 bolt? 23 spline or 35 spline?

It is the 8 bolt 21 spline species.. Thanks Steve

 

[Rwhite1]

Hey Guys, Hoping one of you dana gurus can help me out here. I'm chasing some free wheeling hubs for a 4wd Converted Toyota Coaster Bus with what I believe is a Dana 70 its closed knuckle 6 lug hub with 35 spline axles.
Thanks

 

[Nailhead]

The hub bolt pattern & circle looks like that on my IH 1310, but your stub axle has more splines than I remember having on mine, which looks to ruin any chance of using IH locking hubs.

That’s 5-lug, BTW.

 

[Rwhite1]

The hub bolt pattern & circle looks like that on my IH 1310, but your stub axle has more splines than I remember having on mine, which looks to ruin any chance of using IH locking hubs.

That’s 5-lug, BTW.

The hub bolt pattern & circle looks like that on my IH 1310, but your stub axle has more splines than I remember having on mine, which looks to ruin any chance of using IH locking hubs.

That’s 5-lug, BTW.

Should of said 6 bolt hub. The 5 lug wheel studs is a custom adaptor, it's a standard 8 lug pattern behind the adaptor plate