RJM27
Active member
- 359
- 30
- 28
- Location
- Burdett NY
Did it again 
, won th 7MC=2A @ Meade, Need help locating a TM, filters, oil, start up recomendations. All would be appreciated. I've been trying for several years to get one, took a healthy risk. Now time to go get it and bring in back to NY and put it to use. As Always thanks for the help. Bob.
[h=4]Description:[/h]1994 Keco, Intl. Inc., Mdl: 7MC-2A, Rotary air compressor unit, 9.6 HP diesel engine, 131 hours, Mechanical hand brake, 12 volt negative ground electrical system, direct current, Compressor speed at rated capacity in rpm: 1800, Discharge pressure: 200 pounds per square inch gage, Wheel mounting
, won th 7MC=2A @ Meade, Need help locating a TM, filters, oil, start up recomendations. All would be appreciated. I've been trying for several years to get one, took a healthy risk. Now time to go get it and bring in back to NY and put it to use. As Always thanks for the help. Bob.[h=4]Description:[/h]1994 Keco, Intl. Inc., Mdl: 7MC-2A, Rotary air compressor unit, 9.6 HP diesel engine, 131 hours, Mechanical hand brake, 12 volt negative ground electrical system, direct current, Compressor speed at rated capacity in rpm: 1800, Discharge pressure: 200 pounds per square inch gage, Wheel mounting
