Description from MS number

[cranetruck]

Hi,
I have a damaged castle nut that needs to be replaced and cannot find a description for it other than a general one, "Nut slotted" or something to that effect.
The Number is MS35692-77 and is for the tierod end shown in the image below.
It appears to be a metric 24 mm. The tractor place here in Meadows of Dan had no metrics that size and a 1-14 inch standard thread does not fit.

Is there a look-up table available to find a detailed description based on the MS#?

TIA

 

[TacticalTruck]

MS35692-77 5310-00-070-1902 NUT
these guys have 13 in stock:
http://www.hcpacific.com/inventory/index.php?action=dlweb&series=MS
or here:
http://govsupport.partslogistics.com/demo/search-nsn?criteria=5310-00-070-1902&x=11&y=10

jeff

 

[red devils dude]

bjorn not that I know of, I'm always trying to find specs on the internet with little if any luck but some times
a "google" search will try up a manufacturer that can give a civvy cross hope this helps.

 

[cranetruck]

Thanks, I can always order them as suggested by Jeff and Jed, but would still like to find the description.

 

[TacticalTruck]

I'm working on a lead for MS info but I would figure you'd have a set of calipers and some thread gages to measure it and then buy from McMaster-Carr or similar. The second site I listed has specs available for a fee.
Jeff

 

[surpdlr]

Hi,
I have a damaged castle nut that needs to be replaced and cannot find a description for it other than a general one, "Nut slotted" or something to that effect.
The Number is MS35692-77 and is for the tierod end shown in the image below.
It appears to be a metric 24 mm. The tractor place here in Meadows of Dan had no metrics that size and a 1-14 inch standard thread does not fit.

Is there a look-up table available to find a detailed description based on the MS#?

TIA

Does this help:

THREAD CLASS 2B

THREAD DIRECTION RIGHT-HAND

NUT STYLE A17 SLOTTED, HEXAGON

NUT HEIGHT 0.831 INCHES MINIMUM AND 0.887 INCHES MAXIMUM

WIDTH ACROSS FLATS 1.450 INCHES MINIMUM AND 1.500 INCHES MAXIMUM

TEMP RATING NOT RATED

THREAD SERIES UNF

THREAD QUANTITY PER INCH 12

HARDNESS RATING 69.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM

NOMINAL THREAD SIZE 1.000 INCHES

BEARING SURFACE TYPE CHAMFERED OR WASHER FACED

MATERIAL STEEL OVERALL

SURFACE TREATMENT CADMIUM OVERALL AND CHROMATE

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

NONDEFINITIVE SPEC/STD DATA 4 TYPE AND 16 STYLE AND B GRADE




Jeff

 

[emmado22]

Here ya go...

User ID: castle nut
Characteristics Data Response for NSN 5310-00-070-1902
Item Name: NUT,PLAIN,SLOTTED,HEXAGON

MRC Requirement Statement Clear Text Reply

NAME ITEM NAME NUT,PLAIN,SLOTTED,HEXAGON
AAJD THREAD CLASS 2B
AAJF THREAD DIRECTION RIGHT-HAND
ACTA NUT STYLE A17 SLOTTED, HEXAGON
ADEA NUT HEIGHT 0.831 INCHES MINIMUM AND
0.887 INCHES MAXIMUM
ASDB WIDTH ACROSS FLATS 1.450 INCHES MINIMUM AND
1.500 INCHES MAXIMUM
AZKQ TEMP RATING NOT RATED
BZRR THREAD SERIES UNF
CMLP THREAD QUANTITY PER INCH 12
CQFM HARDNESS RATING 69.0 ROCKWELL B MINIMUM AND
32.0 ROCKWELL C MAXIMUM
CQJX NOMINAL THREAD SIZE 1.000 INCHES
CRTM BEARING SURFACE TYPE CHAMFERED OR WASHER FACED
MATT MATERIAL STEEL OVERALL
SFTT SURFACE TREATMENT CADMIUM OVERALL AND CHROMATE
STDC SURFACE TREATMENT DOCUMENT QQ-P-416,TY 2,CL 3 FED SPEC
AND CLASSIFICATION SINGLE TREATMENT RESPONSE
OVERALL
ZZZT NONDEFINITIVE SPEC/STD DATA 4 TYPE AND 16 STYLE AND B
GRADE

 

[cranetruck]

Beautiful, guys, got a pdf file from Ken in Santa Clara, CA as well.

This forum is outstanding!

Thanks,