tigertank
New member
- 140
- 0
- 0
- Location
- angleton texas
i need a driver door glass somebody decided to bust mine out I guess they thought there was something to steal any help would be appreciated!!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
driver door glass!!!
- Thread starter tigertank
- Start date
FloridaAKM
Well-known member
- 2,699
- 392
- 83
- Location
- Gainesville, Florida
Now you have a real problem in locating one. Is the truck a M-1078 or a different truck in the series? My issue was that my drivers window can prebusted down inside the door & the crank handle mechanism was removed!
FloridaAKM
Well-known member
- 2,699
- 392
- 83
- Location
- Gainesville, Florida
For the M-1078 or the M-1081?
- 10,442
- 6,495
- 113
- Location
- Camp Wood/LC, TX
The door glass is the same!
DanM7890
Active member
- 1,134
- 11
- 38
- Location
- Houston, TX
x2. On the airdrop the glass stays in the door and the top folds over. One note is the glass is different driver side to passenger side because of a slight curve.
![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]"){kind=icon}
tigertank
New member
- 140
- 0
- 0
- Location
- angleton texas
Lmtv 772 call me pls 832 256 0461
sjohn116
New member
- 122
- 6
- 0
- Location
- Baltimore, Maryland
If the above glass for sale has already been sold, does anyone have another driver's side door glass for sale? If LMTV772 still has the glass available, please PM me... mine is shattered and I too need a replacement.
sjohn116
New member
- 122
- 6
- 0
- Location
- Baltimore, Maryland
It appears to be flat on the passenger side, and based on the pile of glass bits in the door, it's tempered, not laminated. Does anyone have the dimensions/template from a previous encounter with the same issue?
- 10,442
- 6,495
- 113
- Location
- Camp Wood/LC, TX
Not flat sorry folks.
sjohn116
New member
- 122
- 6
- 0
- Location
- Baltimore, Maryland
Bummer. Any good leads on where to get drivers door glass?
I had a local glass shop make some passenger windows out of flat glass for us. He sent them off to be tempered and with some silicone spray flat glass will work in a 1081 door but it's a little tight. The original is slightly curved but if you need to seal up cab and don't plan on rolling up and down a lot flat is easier and cheaper to find!
woohaa
New member
- 5
- 0
- 1
- Location
- Mission, Texas
woohaa
New member
- 5
- 0
- 1
- Location
- Mission, Texas
I do need a Driver's Door Window for the LMTV 1078.
Where did you get one?
Where did you get one?
woohaa
New member
- 5
- 0
- 1
- Location
- Mission, Texas
I need a Driver's Door Window for the LMTV 1078.
woohaa
New member
- 5
- 0
- 1
- Location
- Mission, Texas
What was the dimensions for the glass, if you still have it?
woohaa
New member
- 5
- 0
- 1
- Location
- Mission, Texas
Have you seen the picture of the glass?
Is it possible to make it plexiglass?
Something that will not shatter?
.JPG)
Is it possible to make it plexiglass?
Something that will not shatter?
- 6,861
- 696
- 113
- Location
- Stratford/Connecticut
Maybe out of lexan but it would get scuffed over time and end up looking like a humvee plastic window.
sjohn116
New member
- 122
- 6
- 0
- Location
- Baltimore, Maryland
If Eastern has one In stock, take it no matter the price. These windows are worth their weight in gold due to the simple laws of supply v demand. Look at govplanet auctions...nearly EVERY m1081 is missing the drivers glass, at a minimum,
If not the entire door. And the latch. And the striker. And the door handle. These are clues to the bits that will cost you your first born child.
If not the entire door. And the latch. And the striker. And the door handle. These are clues to the bits that will cost you your first born child.