cuba_pete
New member
- 7
- 0
- 0
- Location
- Coupeville, WA
What information/resources can anyone provide for the electrical connectors on the driver's side floor of the M211?
My truck's connectors are corroded to the point of impossible disassembly. The only apparent electricals that work on my rig are the BO's, a couple of dash lights and it starts/runs...that's it. I have split/dry-rotted wiring on both sides of these connectors. I want to cut it all back/splice/repair/replace enough wiring to make it all work again and would also like to use a NOS type plug set.
I have access to just about every crimper known to man and have made up amphenol/bayonet/twist-lok/winchester/etc. connectors before. I just need to know what the p/n is for the connector assemblies and/or where to buy them.
I went through about 30 pages of threads so please don't ask me to search anymore. The search engine is not very discriminating on this site, although there was interesting reading along the way.
My truck's connectors are corroded to the point of impossible disassembly. The only apparent electricals that work on my rig are the BO's, a couple of dash lights and it starts/runs...that's it. I have split/dry-rotted wiring on both sides of these connectors. I want to cut it all back/splice/repair/replace enough wiring to make it all work again and would also like to use a NOS type plug set.
I have access to just about every crimper known to man and have made up amphenol/bayonet/twist-lok/winchester/etc. connectors before. I just need to know what the p/n is for the connector assemblies and/or where to buy them.
I went through about 30 pages of threads so please don't ask me to search anymore. The search engine is not very discriminating on this site, although there was interesting reading along the way.