dodgemain
Member
- 84
- 2
- 8
- Location
- Sterling Heights, MI
Hi, Over the past few weekends I have been working on retrievinga M932A2. Last weekend I finally got it running after doing a bunch of PM work(fluids, filters, fuel, and etc). The truck seems like it does not have much power.It had sunk into the ground a little after sitting for an unknown number ofyears. At full throttle (about 2000 rpm) it would not pull itself out. After aminute or two at 1500 rpm’s it finally pulled itself out of the ruts. It’s beenawhile since driving my M929A2. Is 2000 rpm’s the max for an A2? The truckrolls easily so I know the brakes are not locked up. I took it for a shortdrive and the transmission shifted a few times. But, when I would floor it notmuch would happen. Do you think this is a transmission problem or should I still be looking into an engine problem? Any thoughts would be greatly appreciated. Thanks