nudewheeler
New member
- 41
- 1
- 0
- Location
- Tucson, AZ
Howdy Folks,
Regarding my driveline vibrations I've been researching solutions. One solution is Tom Wood's Slip Yoke Eliminator (SYE) kit for the NP208. This uses a modified NP208 tailhousing and a shaft.
I am curious if anyone has used this for their NP208. I would like to know how you felt about the quality and how it is performing.
Tom Wood's website does not have a dynamic URL, so here is how to get to the page:
This is one consideration in solving my driveline problems. Another would be invest a bit more money, find an NP241 with a 32 spline input (or install a 32 spline input), then put a SYE kit on it...
I am quite curious if anyone on the board has experience with the NP208 SYE kit made from modified parts.
Thanks in advance.
Regarding my driveline vibrations I've been researching solutions. One solution is Tom Wood's Slip Yoke Eliminator (SYE) kit for the NP208. This uses a modified NP208 tailhousing and a shaft.
I am curious if anyone has used this for their NP208. I would like to know how you felt about the quality and how it is performing.
Tom Wood's website does not have a dynamic URL, so here is how to get to the page:
- Click here for 4xshaft.com
- click the top center picture about SKY kits/tailhouse modification
- At the very bottom of this page, press the link labeled "click here for more detailed information"
- Click on the link for 208
This is one consideration in solving my driveline problems. Another would be invest a bit more money, find an NP241 with a 32 spline input (or install a 32 spline input), then put a SYE kit on it...
I am quite curious if anyone on the board has experience with the NP208 SYE kit made from modified parts.
Thanks in advance.