dmetalmiki
Well-known member
- 5,523
- 2,028
- 113
- Location
- London England
Well I have tried the rest, here is the BEST! Cost effective (cheap!) and efective.
I tried centrifuges and all types of filters..but this set up is the cheapest easiest to install use and create decent fuel filtering.
I start at 10 microns. then 5 microns. finally 1 micron. Perfect for my trucks. Including my wrangler! ford F350, and Rover Montego.
The last "run" at 1 micron is incredibly quick showing GOOD filtering with DECENT flow for the fuel pumps injectors and fuel systems. The mixes are.
50% "contam" (petrol diesel from recovery stations)
40% Waste AQTF.
10% waste engine and or Hydraulic Oils.
This "MIX" cleans the systems gives MORE power and MPG, and instant startup
KIT: Golden Rod Water trap filter.
Purtrex PX5-20 Filter inserts. (and suitable 20 cannister. (I use Waterfilterflow)
ALL made in the U.S.A.
I tried centrifuges and all types of filters..but this set up is the cheapest easiest to install use and create decent fuel filtering.
I start at 10 microns. then 5 microns. finally 1 micron. Perfect for my trucks. Including my wrangler! ford F350, and Rover Montego.
The last "run" at 1 micron is incredibly quick showing GOOD filtering with DECENT flow for the fuel pumps injectors and fuel systems. The mixes are.
50% "contam" (petrol diesel from recovery stations)
40% Waste AQTF.
10% waste engine and or Hydraulic Oils.
This "MIX" cleans the systems gives MORE power and MPG, and instant startup
KIT: Golden Rod Water trap filter.
Purtrex PX5-20 Filter inserts. (and suitable 20 cannister. (I use Waterfilterflow)
ALL made in the U.S.A.
Attachments
-
97.6 KB Views: 127
-
97.1 KB Views: 103
-
64.4 KB Views: 91
Last edited: