Pstyckiewicz
Active member
- 178
- 91
- 28
- Location
- Massachusetts
So this is what I used to fill my holes in the truck.
I used approximately 50 stainless M10x30MM bolts and nuts. https://www.amazon.com/gp/aw/d/B0D7YTQKQL?psc=1&ref=ppx_pop_mob_b_asin_image
These are 10 packs with nut bolt washer and lock washer.
In addition I used rubber washers to keep the stainless off the aluminum/paint.
I used approximately 50 stainless M10x30MM bolts and nuts. https://www.amazon.com/gp/aw/d/B0D7YTQKQL?psc=1&ref=ppx_pop_mob_b_asin_image
These are 10 packs with nut bolt washer and lock washer.
In addition I used rubber washers to keep the stainless off the aluminum/paint.
