First time M-35 owner in ND

[NDDeuce]

Hello all,

Just bought a 67' Jeep Kaiser M-35A2 from a local fella, I went through the TM's researched this website thouroughly (long time listener, first time caller) before I pulled the trigger on this buy. Well long story short I've got a technical question. I was troubleshooting an inoperative heater/defrost, I checked all wiring checked/cleaned out the duct work and blowers but after that I flipped the switch to ON and nothing, any suggestions?

 

[197thhhc]

Welcome to the site.

Do you have power to the blower. Have you checked with a multimeter. If it does you probably have a bad blower. Sometimes they can be disassembled and cleaned up and they will work. Good luck. Let us know.

 

[RodUSMC1962]

Welcome from Indiana to the green addiction!

 

[camp9]

Welcome from the UP of Michigan, former resident of Wishek, ND

 

[NDDeuce]

197thhhc, just got done with the multi-meter check out during my lunch, its the blower, its getting power, thanks for the suggestion blower comes out after work.

 

[wreckerman893]

Welcome to the Green Iron Laughing Accademy

How close to Minot are you.

SS member (and all around good trooper) Bighurt is there.

Maybe ya'll can start a support group.

 

[DJones]

welcome from Indy.

 

[Karl kostman]

Welcome NDDeuce from Horace and your in good company in this state, lots of MV owners, I own two Deuces and a 5 ton. If you havent already checked it out there is a group of OD fanatics in this state called the NDMVCA, if you have any questions on this send me a private message and I will supply you with all you need, and you have found the right place to ask questions on your truck here, SS people are a great group of folks! Again welcome and I look forward to meeting you some day NDDeuce
KK

 

[Bighurt]

I'm in Minot! Welcome to the site.

 

[ctmustang]

You have power but do you have good ground?
CT

 

[eaw46]

NDMVCA is haveing a meeting this Sat the 11th at Turtle Lake ND and if you want to meet a bunch of good guys and learn lots about the big green stuff try and get there. It is a great resorce for everyone involved in this hobby to get together and share knowlage and experiances. Check out the website and If you can get down there. Eddy

 

[Bighurt]

NDMVCA is haveing a meeting this Sat the 11th at Turtle Lake ND and if you want to meet a bunch of good guys and learn lots about the big green stuff try and get there. It is a great resorce for everyone involved in this hobby to get together and share knowlage and experiances. Check out the website and If you can get down there. Eddy

I'm going to contact Greg, but it would be great if they added addresses on the site. I was supposed to head to Bismarck on Sat driving by Turtle Lake so it makes a convenient stop.

 

[NDDeuce]

Blower came out Teusday afternoon, ground was needing R2 as well, Rebuilt blower, replaced ground now its good to go, it was approximately +7F this morning and it was fairly warm inside the cab on the way to work.