• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Fixing up my MEP-803A"

majoday

majoday

Active member
84
155
33
Location
Bloomburg,TX
What is the best way to proceed.?I removed # 1, the bottom looks great, all of the top is rusted. The fuel system was terribly contaminated.
 
Guyfang

Guyfang

Moderator
Staff member
Moderator
16,703
23,937
113
Location
Burgkunstadt, Germany
There are a bunch of folks going to jump in here. Surprised @Ray70 is not here first! I am the TM nag. I hope you have taken advantage of the >TM's here in the forum. The Military considered the Pumps to be Pluck & Chuck. The Lister Peter books are here also. They are pretty straight forward. Unscrew the bottom and it simply SHOULD come apart. You should soak them. Pay attention to how it came apart. Keep everything clean. Now its time to hit the hay. The experts will be in on this soon and give you pointers much better then mine.
 
R

Ray70

Well-known member
2,580
5,854
113
Location
West greenwich/RI
Ha! I'm late because I was tied up working.... ;)
Anyway, I'm better with the 002/003 pumps than 802/803 but from what I recall you take the top nut off ( the one under the line nut ) and the guts are mostly accessible through the top.
The clip on the bottom "unhooks" off the plunger ( spring needs to be compressed a little ) and the spring comes off the bottom, while the plunger itself goes up and out through the top.
There were a couple guys recently who posted some good pictures. maybe try searching to see what you can find, but try searching for issues like "won't start" or "no fuel" , if you don't find it searching for "metering pump rebuild"
 
R

Ray70

Well-known member
2,580
5,854
113
Location
West greenwich/RI
Looks like the subsequent posts have you moving in the right direction.
I'll throw Uniquify's post into this thread too.... for future searchers to find metering pump pictures more easily!

Mep-803a motor locking up at 0 and 180deg

Here's what my stuck pump looked like. The large spring at the bottom is compressed. The fuel lever that fits into the rack couldn't rotate left or right. Took the top off the fuel pump with a 17mm. It's normal right-hand threads. Looking inside, the plunger is the shinier piece in the...
steelsoldiers.com
 
Guyfang

Guyfang

Moderator
Staff member
Moderator
16,703
23,937
113
Location
Burgkunstadt, Germany
Good start on pictures! There are a few things you can see that need attention. I will lead off with the Quad Mod. Thats a Modification to add a fuse to the Volt regulator circuit.

Tell us what you have done so far, if anything.
 
majoday

majoday

Active member
84
155
33
Location
Bloomburg,TX
Well, I attached the fuse, but am waiting on the MOV. Today I also checked all connections, except the twist kind. Tightened several. Vacumed out sand and crud. Tightened adjustment cable. Prior work: cleaned IP's and lines. replaced fuel return line. Cleaned attachment ports in I/J's. Cleaned fuel tank. Urdered Bung. Checked antifreeze coolant.
 
majoday

majoday

Active member
84
155
33
Location
Bloomburg,TX
majoday said:
What are Stickies? I have been reading the Generators Forum and have seen pictures. The info is great. I copied and pasted on MS Word some info.
Click to expand...
I did not order the 14D151K MOV, the in-USA appears to be out of stock. I will run the motor soon , but pull the fuse on Pin 8 to disable the gen head. In the mean time, i will find the MOV.
 
Guyfang

Guyfang

Moderator
Staff member
Moderator
16,703
23,937
113
Location
Burgkunstadt, Germany
majoday said:
What are Stickies? I have been reading the Generators Forum and have seen pictures. The info is great. I copied and pasted on MS Word some info.
Click to expand...

Stickies. When you first open up the SS web page, scroll down (for ever) until you see Other Military Machines. Click there. The first 6-7 threads had what looks like a thumb tack in the middle of the thread. They stay there. Never move down. They contain Incredible information. Most, (not all) of the ones you should read are from Daybreak.
 
nextalcupfan

nextalcupfan

Well-known member
348
506
93
Location
NW Missouri
majoday said:
I did not order the 14D151K MOV, the in-USA appears to be out of stock. I will run the motor soon , but pull the fuse on Pin 8 to disable the gen head. In the mean time, i will find the MOV.
Click to expand...
The MOV protects the voltage regulator not the gen head. So I don't think pulling the fuse to the gen head will actually help.
I might be able to send one, when I bought my MOV's 2 years ago I got a pack of them.

Amazon.com: 10pcs varistor 14D151K 150V piezoresistor 14D151 : Industrial & Scientific

Amazon.com: 10pcs varistor 14D151K 150V piezoresistor 14D151 : Industrial & Scientific
www.amazon.com

I found my purchase link, apparently they are FengHui.
You mentioned you wanted made in USA though.

EDIT: I did a quick search and Mouser has 7,000 ready to ship. Brand Bourns.
I would trust them from Mouser personally.
 
majoday

majoday

Active member
84
155
33
Location
Bloomburg,TX
nextalcupfan said:
The MOV protects the voltage regulator not the gen head. So I don't think pulling the fuse to the gen head will actually help.
I might be able to send one, when I bought my MOV's 2 years ago I got a pack of them.

Amazon.com: 10pcs varistor 14D151K 150V piezoresistor 14D151 : Industrial & Scientific

Amazon.com: 10pcs varistor 14D151K 150V piezoresistor 14D151 : Industrial & Scientific
www.amazon.com

I found my purchase link, apparently they are FengHui.
You mentioned you wanted made in USA though.

EDIT: I did a quick search and Mouser has 7,000 ready to ship. Brand Bourns.
I would trust them from Mouser personally.
Click to expand...
Ordered them. Thanks for the guidance. I did not know anything about them.
 
majoday

majoday

Active member
84
155
33
Location
Bloomburg,TX
nextalcupfan said:
The MOV protects the voltage regulator not the gen head. So I don't think pulling the fuse to the gen head will actually help.
I might be able to send one, when I bought my MOV's 2 years ago I got a pack of them.

Amazon.com: 10pcs varistor 14D151K 150V piezoresistor 14D151 : Industrial & Scientific

Amazon.com: 10pcs varistor 14D151K 150V piezoresistor 14D151 : Industrial & Scientific
www.amazon.com

I found my purchase link, apparently they are FengHui.
You mentioned you wanted made in USA though.

EDIT: I did a quick search and Mouser has 7,000 ready to ship. Brand Bourns.
I would trust them from Mouser personally.
Click to expand...
Thank you! I ordered 10!!
 
majoday

majoday

Active member
84
155
33
Location
Bloomburg,TX
Well, the Mod w/ a fuse and a MOV is done. I started the set today. 60cy/240v charged batts. Ran rough. I/p's ccw to stop. Initially black smoke some white. Cleared up some. Temps #1 170, #2 190's,#3 190's #4 220's. I did not remove and clean the IJs It may make more sense to buy new. I have not found anything on r n repair for I/J's.
 
You must log in or register to reply here.
110,819members
165,275threads
2,325,440posts
1,087online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks