Flasher connector wanted

[cranetruck]

Does anyone have this connector from a parts vehicle, that he would be willing to part with?
It's the female MS connector that plugs into the turn signal flasher. A few inches of the wiring would be helpful to.
Thanks

 

[Armada]

I might. How many pins, 2?

 

[cranetruck]

Three (3).
It's an MS3106a16-10s connector.
If you have it, and don't mind parting with it, just cut the wires from the harness on the vehicle to free the connector. the wires are tagged "A", "B" and "C".
Let me know how much $$.
I need one for my intermittant buzzer circuit shown in another thread....

 

[Armada]

You can have it, but just checked my parts harness and it is missing. Found an extra flasher though. Sorry.

 

[SpruceDeuce]

i am 95% sure i have it

i bought a flasher and it came with the plug i am at college until next weekend but when i get home i will check and see if it is the right one and either post a pic of it here or pm you

 

[cranetruck]

Thanks man, as usual with these things, no hurry, my projects sit around for ages.

 

[SpruceDeuce]

Bjorn,

here are the pics of the connector i have pm me your address if it is the right one and i can mail it out

 

[cranetruck]

Yes Sir, that's the baby! PM in the works.
Thanks.

 

[ida34]

Bjorn,
Isn't that similar to what your sending me?

Chuck

 

[cranetruck]

Similar, but different shell size. There are probably 10,000 or more combinaions of these connectors.
You will need to replace the inserts in the ones I sent you....

 

[rboltz]

Just for info, this connector and any other MS type is available from allied electronics. Be careful ordering as you must "assemble" it and order the right items as well as "plug" or "socket". It is best to get a catalog or print the MS connector pages online along with the pin drawings. It takes a bit of study to learn the proper numbering.