NITEFARMER
New member
- 14
- 0
- 0
- Location
- Shenandoah Valley / VA
Hello all,
I need help! I am about to go crazy here! My Deuce quit running several years ago and I am just getting back to working on it. It was running great and just stopped. After reading posts here I determined it was the button had come off the HH. So I put it back on and still cannot get it to start. It tries with the throttle wide open but it seems like it is only getting a very small amount of fuel. I have tried everything I know to get the lines loose at the injectors and cannot. They are so stuck that I think I am going to break the tubing, so I stopped. Any secrets for this? So I bled it off at the pump end, and then tried a little bit of ether(which I despise) and still no luck. I have fuel at the filters but would like to know which line to crack to be sure its getting good fuel to the pump? This setup is unlike any of our tractors that I work on whereas it seems the fuel goes into the pump before going into the secondary filters? Also, I checked the shutoff and it is operating freely. All my other equipment it goes thru the filters first. Getting very frustrated here as its a water truck and I need it bad, and just seem to have no luck. Any and all help greatly appreciated!!!
Thanks, NF
I need help! I am about to go crazy here! My Deuce quit running several years ago and I am just getting back to working on it. It was running great and just stopped. After reading posts here I determined it was the button had come off the HH. So I put it back on and still cannot get it to start. It tries with the throttle wide open but it seems like it is only getting a very small amount of fuel. I have tried everything I know to get the lines loose at the injectors and cannot. They are so stuck that I think I am going to break the tubing, so I stopped. Any secrets for this? So I bled it off at the pump end, and then tried a little bit of ether(which I despise) and still no luck. I have fuel at the filters but would like to know which line to crack to be sure its getting good fuel to the pump? This setup is unlike any of our tractors that I work on whereas it seems the fuel goes into the pump before going into the secondary filters? Also, I checked the shutoff and it is operating freely. All my other equipment it goes thru the filters first. Getting very frustrated here as its a water truck and I need it bad, and just seem to have no luck. Any and all help greatly appreciated!!!
Thanks, NF