gasket for rear cap on m1009

[Matt Kahle]

Hey guys I need a tip on gaskets for the rear cap on the m1009 I looked in the TMs for something on that but couldn't find anything about the rear gaskets...I want to do the gaskets on the door windows and tail gate. Could some one point me in the right detection? or give to a link to a web site on replacing them?

 

[antennaclimber]

http://www.classicparts.com/Cab/products/333/

 

[Gunzy]

Try LMC truck parts.

 

[milradioman]

I just replaced both the inner and outer cap gaskets (there are two) on my M1009, purchased from LMC, quality looks good, used the special glue from NAPA to hold them in place, had to stretch them a bit to reach end to end, but stopped the rain from leaking.

 

[Mainsail]

If you're doing the seals around the top, here's a cheater:
Classic Parts. Here are the four seals:
01-817 (1976-91) Blazer - Body Side Seal - Le1 $29.95
01-818 (1976-91) Blazer - Body Side Seal - Ri1 $29.95
01-813 (1976-91) Blazer - Upper Header Seal -1 $34.95
01-814 (1976-91) Blazer - Upper Header Seal -1 $29.95

 

[ThunderCracker]

I bought a kit that had door seals, cap seals and rear window seals. It's cheaper than getting individual seals. I found it on eBay and they all fit great.

 

[Matt Kahle]

Thanks for the info I think I should go with a kit of seals I will look on ebay then. Should I search for K5 seals?

 

[ThunderCracker]

Yes K5 Blazer. The seller was Am-Autoparts I believe.