Gen II light not coming on.

[Husker67]

I was on my maiden road trip with a 1986 M1008 when the wipers quit working in the rain. The voltmeter was in the mid-yellow but moved into the red after a few minutes. When I got it home I pulled the batteries, they tested good and were recharged. The alternators were pulled and they too passed tests. I began to trouble shoot the charging system and was able to find a loose wire which allowed the Gen I light to work. I connected the wires to the Gen II light and verified it works but when connected per the wiring diagram it doesn't light.

I'm trying to locate the relay and diode noted in the wiring diagram but I'm not sure which part of the dash to be tearing into. Any assistance/direction is appreciated.

 

[dependable]

Below threads are in "CUCV helpful threads", at top of CUCV forum on this site, might want to read them all

http://www.steelsoldiers.com/showthread.php?50551-CUCV-Switches-Diodes-Relays gen 2 diode pictured photo 7

http://www.steelsoldiers.com/showthread.php?121589-CUCV-GEN1-and-GEN2-Exciter-troubleshooting note, there are 3 relays under ash tray, one of the square ones is gen 2 relay.

 

[Husker67]

Thanks dependable, still learning how to navigate and search these forums.