-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
GMA cab covers
- Thread starter rwelker
- Start date
halftrack
Active member
- 1,018
- 11
- 38
- Location
- New Orleans, LA
They are the insulated ones.
sprucemt
New member
- 554
- 14
- 0
- Location
- Warrensburg NY
Did you check with Breton Industries Inc?
www.bretonindustries.com
518-842-3030
They are a corporate member of the MVPA and other MV clubs.
www.bretonindustries.com
518-842-3030
They are a corporate member of the MVPA and other MV clubs.
jasonjc
Well-known member
- 5,326
- 289
- 83
- Location
- Gravette Ar.
Anyone know who makes the covers for the M103 gen trailers????
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Pic please Gene?
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Thats exactly what I want. It won't match the 34052 but at least it's all green and insulated. Did it cost extra for them not to paint it?
saddamsnightmare
Well-known member
- 3,618
- 80
- 48
- Location
- Abilene, Texas
July 26th, 2008.
Dear Rwelker:
If the GMA tops for your truck are the same as the 2-1/2 and 5 ton cabs, the insulations the thing.....! I just refitted my 1971 Kaiser Jeep M35A2 Wo/W "Saddam's Nightmare" with a tan 686A insulated top, and I was impressed with the quality materials, workmanship and fit! The only grouse I have is that the roof bows (outer 2) on my M35A2 top header to windshield angle in from the outside and don't line up with the velcro tiedowns on the new top..... oh, well, time to reengineer the old bow system.
I also have trouble keeping the bottom bow feet down in the windshield header holes, as the top tends to lift them out at speed with both windshields open.
BUT..... I have noticed that the cab seems several degress cooler then when she had the insulated metal cab cover (top) on her, so for my money.... it's the best $175.00 I've spent.... I wish my wife's 2006 Jeep Wrangler Unlimited soft-top was as well made for the money.... It'd be a lot cooler, too. You should have no problem with the color or fit.....
![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]")
Sincerely,
Kyle F. McGrogan
1971 Kaiser Jeep M35A2 Wo/W "Saddam's Nightmare" Desert Storm and Vietnam Veteran Deuce
1968 Johnson Corp M105A2 Cargo Trailer (awaiting it's new Tan 686A GMA cover!)
1967 Hercules MEP023A gas Gen-set APU
1963 Swiss Army Cargo Unimog, S.404.114 MB (I WISH GMA made tops for these beasts!!!!).
Dear Rwelker:
If the GMA tops for your truck are the same as the 2-1/2 and 5 ton cabs, the insulations the thing.....! I just refitted my 1971 Kaiser Jeep M35A2 Wo/W "Saddam's Nightmare" with a tan 686A insulated top, and I was impressed with the quality materials, workmanship and fit! The only grouse I have is that the roof bows (outer 2) on my M35A2 top header to windshield angle in from the outside and don't line up with the velcro tiedowns on the new top..... oh, well, time to reengineer the old bow system.
I also have trouble keeping the bottom bow feet down in the windshield header holes, as the top tends to lift them out at speed with both windshields open.
BUT..... I have noticed that the cab seems several degress cooler then when she had the insulated metal cab cover (top) on her, so for my money.... it's the best $175.00 I've spent.... I wish my wife's 2006 Jeep Wrangler Unlimited soft-top was as well made for the money.... It'd be a lot cooler, too. You should have no problem with the color or fit.....
Sincerely,
Kyle F. McGrogan
1971 Kaiser Jeep M35A2 Wo/W "Saddam's Nightmare" Desert Storm and Vietnam Veteran Deuce
1968 Johnson Corp M105A2 Cargo Trailer (awaiting it's new Tan 686A GMA cover!)
1967 Hercules MEP023A gas Gen-set APU
1963 Swiss Army Cargo Unimog, S.404.114 MB (I WISH GMA made tops for these beasts!!!!).
reuben
New member
- 67
- 0
- 0
- Location
- Spencer TN
I've been thinking about one for my M52, color dosn't matter because I'm not trying to restore and make it look perfect, (if I were I'd start with a truck that wasn't full of dents and bruses) It had a crude plywood top that was half rotten and I didn't keep it.
Just need something to keep the rain off the driver. There's no supports but if they cost much extra I could make something as I'm always doing some sort of fabrication. So how do I match it up with the numbers on the mfg's site?
Just need something to keep the rain off the driver. There's no supports but if they cost much extra I could make something as I'm always doing some sort of fabrication. So how do I match it up with the numbers on the mfg's site?
papercu
Active member
- 2,930
- 31
- 38
- Location
- Baxley, Ga.
covers
Comptech Corporation of Maryland
15944 Derwood Road
Rockville, MD 20855-2123
Phone 301-519-3400, 301-519-3401
Fax 301-975-0061, 301-975-0712
sales@mavencorporation.com
and
Ehmke Manufacturing Company, Inc
4200 Macalester Street
Philadelphia, PA 19124
Phone: (215) 324-4200
Fax: (215) 324-4210
salesandmarketing@ehmkemfg.com
If you find more info. let us know. Wayne
Just going by the NSN 2540-00-926-0993, venders are:
Comptech Corporation of Maryland
15944 Derwood Road
Rockville, MD 20855-2123
Phone 301-519-3400, 301-519-3401
Fax 301-975-0061, 301-975-0712
sales@mavencorporation.com
and
Ehmke Manufacturing Company, Inc
4200 Macalester Street
Philadelphia, PA 19124
Phone: (215) 324-4200
Fax: (215) 324-4210
salesandmarketing@ehmkemfg.com
If you find more info. let us know. Wayne