TheAlfredo
Member
- 165
- 11
- 18
- Location
- Miami, FL
Gone
Last edited:
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Gone
- Thread starter TheAlfredo
- Start date
Ray70
Well-known member
- 2,592
- 5,907
- 113
- Location
- West greenwich/RI
It could be due to loose or out of adjustment fuel metering pumps.
Also look at the stop screw for the fuel shut-off lever, to see if it looks like it has been moved? Maybe someone fiddled with it, or it wasn't locked correctly and has moved with vibration.
Lastly would be an internal issue with the governor assy. or fuel rack, but investigate all the external stuff first.
Also look at the stop screw for the fuel shut-off lever, to see if it looks like it has been moved? Maybe someone fiddled with it, or it wasn't locked correctly and has moved with vibration.
Lastly would be an internal issue with the governor assy. or fuel rack, but investigate all the external stuff first.
Bmxenbrett
Member
- 602
- 30
- 18
- Location
- NY
My vote is for the injection pumps not clocked right or the fuel rack jammed up.
TheAlfredo
Member
- 165
- 11
- 18
- Location
- Miami, FL
Took these today. But didn’t have time to start it up or any trouble shooting.
Attachments
TheAlfredo
Member
- 165
- 11
- 18
- Location
- Miami, FL
I should also add the generator does shut down if it is cold....slower than it should. But it does shut down. After I have it in the load bank and it’s at temp is when it doesn't want yo shut down.