wehring
Active member
- 1,375
- 26
- 38
- Location
- Angleton, TX
OK guys... let the ribbing begin. I can not figure out how to operate the hydro winch on my M925.
I put the tranny in gear and held the brake while I pulled the PTO lever to engage then put the tranny in neutral.
I can hear the PTO working but when I pull/push the line in/out lever nothing happens. The clutch at the winch in engaged and the spool lock is unlocked.
What an I doing wrong? I want to cover the obvious before I open the linkage box to check for drama.
Justin Wehring
979 997 3112
I put the tranny in gear and held the brake while I pulled the PTO lever to engage then put the tranny in neutral.
I can hear the PTO working but when I pull/push the line in/out lever nothing happens. The clutch at the winch in engaged and the spool lock is unlocked.
What an I doing wrong? I want to cover the obvious before I open the linkage box to check for drama.
Justin Wehring
979 997 3112