HMMWV Weapon Platform Question...

[decodeme2]

Hey Guys,
Ive have searched in Vain for a :
HMMWV Pedestal Retaining Pin, That holds the 8" Pedestal in the Weapons Platform.

I think Its a Single ear Quick release pin 9/16 X 6 or 7"....

Does anyone know for sure the size and Where to find One?
Ive have Tried BMG and Austin/Beltfed...

Im useing a bolt for now...*URG*...


Thanks In advance!
Cevon...

 

[Elwenil]

I don't know exactly what you are looking for, but you can find a lot of odds and ends like quick release pins and such from McMaster Carr.

www.mcmaster.com

 

[decodeme2]

Tried Them, Nothing with 9/16..Dia...jumps from 1/2 to 5/8....Maybe the pin is 5/8...?
Maybe I looked in the wrong area..
Kevin..

 

[army_greywolf]

NSN 5340-01-436-4363

Quick Release Pin .625x2.1 inches, but the pins that come are a bit different...i dunno...so you try that dimension and get back to me.

I rarely deal with turrets, mostly because all our gun trucks have GPKs on them ((gunners protection kits)) and have all new components.

 

[army_greywolf]

and theres one for M1025 series that one is .375x4.75 inches

 

[TedG]

Are you talking about the pin in my picture? If so, I might have an extra...will check tonight and let you know.

Regards,

 

[decodeme2]

THATS IT!!!, Thanks!
Yes, Let me know~! Thanks...
decodeme@comcast.net
Kevin..

 

[TedG]

Kevin,

The pin that I have that came from this type of mount as shown in my picture is 5.5" of gripping (base of handle to locking balls). Diameter is 0.5" exactly. This should work unless someone drilled out your station and riser. This pin is new surplus with lanyard. Very good condition. $75 plus ups.

Regards,

 

[decodeme2]

Sold..