How much paint for M1009?

[BKinzey]

I'm going to be painting the exterior body of my M1009 and I have no idea How much paint to get. Hopefully a gallon will be more than enough? So a gallon of primer & a gallon of paint?

Thanks

 

[mangus580]

Well, I used almost 2 full gallons on mine. But.... I had to fully cover the white that was on it.

 

[steelsoldiers]

I used about 1.5 gallons on mine. One coat on the inside and two on the outside.

 

[Armada]

Definately get 2 gals primer, and 2 of color if you're doing in and out. Depending on the kind of job you want, you'll want to prime, block sand, prime again, and 2 coats of paint. You'll have enough to do inside of top, under hood, front and backside of bumpers, everything. What kind of paint are you using? I can only comment on Gillespie 24087. I would recommend using hardener with it, if that's what you're using.

 

[BKinzey]

It's just the exterior body. I have other plans for the frame, undercarriage, and interior.


How about the cap? Since it's fiberglass do I need to primer it as well?

As to the paint itself I'm not sure but I do plan to stay away from CARC as I've read about exposure & enviromental concerns. Since this will be my first attempt of painting with more than a rattle can I should stick to basics. Of course I will be using a mask, gloves & protective clothing.