• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

In the process of doing a 12 volt conversion

kjasdaddy

New member
18
0
1
Location
Mineral Wells, TX
Please help!! I am doing a 12 volt conversion and it says to remove the condensor on the passenger side alternator. The question I have is do I reattach the wire after I cut it out? I hope my siginature works I have had problems in the past :x
 

1956_4x4

New member
368
0
0
Location
Crestview, Florida
kjasdaddy said:
Please help!! I am doing a 12 volt conversion and it says to remove the condensor on the passenger side alternator. The question I have is do I reattach the wire after I cut it out? I hope my siginature works I have had problems in the past :x
Remove the condensor, including the short piece of wire that goes to the condensor.

Smitty
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks