jkade72
New member
- 36
- 0
- 0
- Location
- Centre, AL
I recently bought a m1008 none running. It was missing the pass inner fender, drivers alt., guage cluster and steering column. Also noticed that a few wire had been cut from the distribution block on the fire wall and one had been butt connected with a new fuseible link. Inside the cab there is a blue plug that plugs into the steering column that has a yellow, red, brown, and pink wire if I remember right. The red and pink wires had been melted so I cut that section out of another truck and replaced it. I also put some inline fuse holders on the wire that went to the dist. block on the firewall. So got a column installed and the batteries hooked up and as soon as you turn the key on it blows one of the inline fuses I installed. All the wires look good and that wire goes back to the fuse block and the harness I replaced. Any ideas????
THanks
THanks