Injector pump rebuild instructions

[superburban]

Does anyone have a manual or PDF on how to rebuild a stanadyne injector pump? I have a bunch of spares laying around in my garage, and I thought I would try my hand at rebuilding.

And I am aware that it requires "specialty stanadyne tools". Not a big deal.

 

[peyton]

Does anyone have a manual or PDF on how to rebuild a stanadyne injector pump? I have a bunch of spares laying around in my garage, and I thought I would try my hand at rebuilding.

And I am aware that it requires "specialty stanadyne tools". Not a big deal.

Don't know if this is what you are looking for or not but the TM9-2815-237-34 tech manual has a large section on repairing and calibrating the fuel injection pump. It can be found here in the resources section under tech manuals. Good luck.

Peyton

 

[superburban]

Thanx peyton!
That's what I'm looking for!

 

[superburban]

Little note:
TM9-2815-237-34 is just an exploded view parts list, but it is, indeed, helpful.

 

[peyton]

Little note:
TM9-2815-237-34 is just an exploded view parts list, but it is, indeed, helpful.

I'm glad that you found it somewhat helpful even tho it didn't have the detail you were looking for. Knowing very-little-to-nothing about IP's, the IP sections seemed fairly complete to me. For example, the section on IP calibration is over 30 pages long with fairly explicit directions. Good luck with your project.

Peyton

 

[bottleworks]

Years later, but might be helpful for someone.
View attachment Stanadyne_DB2_Operation_and_Instruction_Manual_99009.pdf

 

[Goldking]

How do i find the resource section to get the injector pump diagram

 

[glassk]

from bottleworks post

 

[Warthog]

http://www.steelsoldiers.com/showthread.php?77609-TM-s-for-the-CUCV

TM 9-2320-289-34 Sections 3-31 to 3-45 for repair instructions (calibration is the BIG issue)

TM 9-2320-289-34P Figure 15.