NRGarrott
New member
- 36
- 0
- 0
- Location
- Annapolis, MD
Hello,
I removed, cleaned, and replaced the nozzles on all of my injectors last week. I'm having trouble tracking down a shop to test my injectors. Right now a couple of my hard lines running from the IP to the injectors are bent clear of the block to give me room to remove the injectors. Could I leave 7 of the lines not connected and hook 1 up. Then crank the engine over and see if I have fuel flow, and in turn test all 8 injectors this way?
Thanks for your help.
I removed, cleaned, and replaced the nozzles on all of my injectors last week. I'm having trouble tracking down a shop to test my injectors. Right now a couple of my hard lines running from the IP to the injectors are bent clear of the block to give me room to remove the injectors. Could I leave 7 of the lines not connected and hook 1 up. Then crank the engine over and see if I have fuel flow, and in turn test all 8 injectors this way?
Thanks for your help.