• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

J-pipe drain

dcwilkie

New member
292
2
0
Location
Huntsville, AL
Started the Deuce yesterday after an afternoon shower and blew wet tiny black specks all over everything.
I'd like to weld a fitting on the bottom of the pipe and install a drain plug. Anyone know why this won't work?
 

Atomic

Member
410
10
18
Location
Albany, GA
I'm not trying to be a a$$ when I say this but would'nt a coffee can or 5 gal bucket work just fine and save you a bunch money and time?
 
A

A/C Cages

Guest
But always remember to remove it before it blows off and hits your wifes Hummer leaving a chip in the windshield...oops She will never let me live that one down.lol
 

DMaddox

Member
140
0
16
Location
Independence, Ky
Started the Deuce yesterday after an afternoon shower and blew wet tiny black specks all over everything.
I'd like to weld a fitting on the bottom of the pipe and install a drain plug. Anyone know why this won't work?

I think this is a great idea!! I have been planing to do the same thing with mine. Just a simple 1/2 ball valve should do the trick. Go to the local plumbing supply and buy a 1/2 inch weld-a-let. Be careful not to blow through the stack.
 

Heavysteven

New member
2,090
10
0
Location
Hickory Flat Ga
I am thinking of cuting my stack flat horizontally and adding a rain flap. I saw one at the tractor supply store in canton. This would make it "simple stupid".
 
Last edited:

mdmorgan

AM3 U.S. Navy
1,085
102
63
Location
Forsyth, Ga.
I am think of cuting my stack flat horizontally and added a rain flap. I saw one at the tractor supply store in canton. This would make it "simple stupid".
Mine came with one on it from uncle sam, works good, j-pipe is as solid as a new one:jumpin:.
 
Last edited:

Ridgerunner

New member
791
6
0
Location
Holland, Mi
No need for pipe fittings or a ball valve. Just drill a small 1/8" hole, into the bottom of the J-pipe. That is all that's needed to keep water from pooling.
 

ARYankee

Well-known member
1,983
33
48
Location
Benton, AR
It's a great idea!!! I have thought about doing this as well. I have even suggested it to a couple of members a while back. I was thinking of putting a solenoid on there with a toggle switch in the cab but a manual ball valve will work just the same. I need to add this to my growing list of mods :) Thanks for bringing this up.
 

swampzr2

New member
207
0
0
Location
Algonquin, IL
If I didn't have a flapper on mine, I would do like Ridge runner said. Just drill a real small hole at the lowest point in the "J"

No need for pipe fittings or a ball valve. Just drill a small 1/8" hole, into the bottom of the J-pipe. That is all that's needed to keep water from pooling.
 

197thhhc

Active member
1,067
15
38
Location
Williamsburg, OHIO
Drill a small hole at the lowest point like others have said. No muss no fuss. We did it to the deuces in my unit when we went to Honduras " to build roads" because of the huge amounts of rain down there.
 

tm america

Active member
2,600
24
38
Location
merrillville in
Yup just drill an 1/8 inch hole in the bottom of the j .. Most cars have similar holes in the mufflers to prevent this exact problem.. i have a friend who bought a brand new mecedes.. it wouldn't start in the winter turned out it didn't have a drain hole it the exhaust system and the water would freeze in the bottom of the muffler and plug the exhaust-no start.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks