bmchauvette
New member
- 9
- 7
- 3
- Location
- Easley sc
Will running my MEP003 with the batteries disconnected kill the output?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
killing my MEP003
- Thread starter bmchauvette
- Start date
Ray70
Well-known member
- 2,585
- 5,865
- 113
- Location
- West greenwich/RI
No, it won't kill the output, but probably isn't a very good idea.
I'm not 100% positive but I thought I read that running without batteries can damage your DC charging circuit.
I would double check before doing it... but, I have a hunch you already did and now have an AC output problem??
If so, can you elaborate on what exactly happened?
I'm not 100% positive but I thought I read that running without batteries can damage your DC charging circuit.
I would double check before doing it... but, I have a hunch you already did and now have an AC output problem??
If so, can you elaborate on what exactly happened?
Scoobyshep
Well-known member
- 1,127
- 1,490
- 113
- Location
- Florida
Looking at the diagrams and it shouldnt, But i do recall a procedure for testing the alternator circuit with a resistor, SOOO it might not be the best idea to run it with no battery
Triple Jim
Well-known member
- 1,375
- 287
- 83
- Location
- North Carolina
One problem is that without a battery, the high amount of ripple on the battery charging circuit often destroys the RF noise suppression capacitors at the fuel pumps and maybe other locations I can't think of. If one of those decides to become a short circuit, you'd lose all 24v.