• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Kysor fan clutch rebuilding video on You Tube

papakb

Well-known member
2,285
1,185
113
Location
San Jose, Ca
Found this animated video on You Tube that demonstrates how the fan clutch works. It explains a lot about it that's hard to understand because it works differently that most people expect because of it's fail safe operation.

I removed the first video I linked to because it just wasn't accurate enough for the clutch the HMMWV uses.


 
Last edited:

Coug

Well-known member
Steel Soldiers Supporter
2,975
4,356
113
Location
Olympia/WA
I know it was just to run them down, but using a 1/2" impact gun with reducers to 3/8" then down to 1/4" drive sockets for both removing and installing small bolts just seems like a bad idea to show people. You'll always end up with that one guy snapping off bolts because he wasn't careful.
 

papakb

Well-known member
2,285
1,185
113
Location
San Jose, Ca
Coug, Your exactly right, it's a bad plan. I used a 1/4" ratchet and still managed to break one of them. That red Loctite is a bitch!
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks