Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
so my lmtv blinkers and hazardous lights stop working after a 30 minute drive
This has happened multiple times and always started working again the next day
Is my problem the blinker and if so where is it located?
where should I purchase?
thanks
It is under the passenger dash. Metal case about 4X3X2 with a 3 pin cannon plug on it. I have seen them on Ebay, I am going to retrofit a 3 wire solid state truck flasher that is a little more available, Made by pedersen if I recall.
Was going to take a run at fixing mine, but they potted it with a really tough material(won’t dissolve, wont melt) so I might just machine it out and re-use the case/connector with the commercial flasher module...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!
