wgr4
Member
- 30
- 2
- 8
- Location
- Jamestown, NC
I just recently got an LMTV and I have been working on the doors. My driver's side door was missing the striker and so I found one and installed it on the door. Door shut perfectly and then when I go to open the door from the inside the handle moves but the door will not open. I get out on the passenger side and go around and the door will not open from the outside either. I have the inner door cover off and I can see that the mechanism is moving so:
1. Is there a way to wedge in a screwdriver from the inside and pop open the door?
2. When you install the piece that connects to the end of the door/latch, do you have to do anything special? I just screwed in the 3 screws and shut the door, did I miss a step?
Many Thanks,
Will
1. Is there a way to wedge in a screwdriver from the inside and pop open the door?
2. When you install the piece that connects to the end of the door/latch, do you have to do anything special? I just screwed in the 3 screws and shut the door, did I miss a step?
Many Thanks,
Will
