Looking for a TM for a Skytrak 6000M

[Bjmca]

Any chance anyone has a technical manual or any repair manuals for the 6000m telehandler? I have access to TM 10-3930-660-24P which is posted on Skytrak site but im looking for one that can help me diagnose a control issue for the fork functions. Thanks

 

[Guyfang]

Here is the -10 TM. The -23-1 and -23-2 are way too big to up load here, or even in the forum. You can send me your email in a PM and I will see if I can upload them to you, or simply go to LOGSA, the ETM page, and download them like I did.

 

[Bjmca]

Thanks for this info.

 

[Guyfang]

Do you need the link for ETM?

 

[Bjmca]

Do you need the link for ETM?

I have found the bad part and started another thread.

 

[Guyfang]

Joy stick? Or hyd valves?

 

[Bjmca]

Joy stick? Or hyd valves?

Its a burned resistor on the board out behind the forks. The rubber seal was bad and the box was full of stink bugs, I'm guessing it caused a short.

 

[Mullaney]

Do you need the link for ETM?

Guyfang

Didn't need the TM's for a SkyTrac, but I downloaded them anyhow. Seems to me that too many books are never enough. And if I happen to be on a quest for a particular machine - GREP will find it faster than a web search - especially if I don't have a specific name to search for.

I was really amazed. The LDAC ETM search was the most common sense usable tool that I have found for TM's.

THANKS for the tip and the pointer to that site Guy!


Tim

 

[Guyfang]

Its a burned resistor on the board out behind the forks. The rubber seal was bad and the box was full of stink bugs, I'm guessing it caused a short.View attachment 829827View attachment 829828View attachment 829827View attachment 829828View attachment 829827View attachment 829828

This is NOT an uncommon failure for this model. I tried to not ever get involved with anything not a gen set, but ran into forklifts from time to time.

 

[SWATMOD]

.

Hello sir, I am trying to get the -23-1 and -23-2 (as well as any other TMS for this machine so i can diagnose an electrical issue. If there is any chance you'd be willing to help me out that'd be awesome. I do not have access to the mil sites unfortunately.

Hope all is well! Thank you for your consideration in helping me out!

 

[Guyfang]

Go to the second post in this thread. It has a link to the -10 TM. I will see if I can find in my garbage dump of a computer, the -23

 

[Guyfang]

Do you still need the TM's?

 

[Mullaney]

Do you still need the TM's?

.
Yes Sir. He was gathering the dataplate info - but if you already happen to have them available - YES and Please

 

[Guyfang]

They are too big to up load to the forum. I might be able to send them to an email address. We are speaking about the TM 10-3930-660- TM's? Right?

 

[Mullaney]

They are too big to up load to the forum. I might be able to send them to an email address. We are speaking about the TM 10-3930-660- TM's? Right?

.
I believe so.

 

[Guyfang]

Was just about going to bed. Will look in the morning and send them to you Tim, if I can shrink them.

 

[Mullaney]

Was just about going to bed. Will look in the morning and send them to you Tim, if I can shrink them.

.
Thanks Guy!!

 

[Guyfang]

OK, TM's sent to Tim.

 

[Mullaney]

OK, TM's sent to Tim.

.
Thanks Guy!!

I have them posted with a link below:

Forklift, Rough Terrain 6000# Variable Reach - aka: SkyTrack

. Here are the TM's for the Rough Terrain 6000 LB Forklift gathered in one place. Lubrication Order LO 10-3930-660-12 Operator's Manual TM 10-3930-660-10 Unit Maintenance Manual TM 10-3930-660-20 Unit Maintenance Repair Parts & Special Tools TM 10-3930-660-24P Direct and General Support...

www.steelsoldiers.com

 

[Guyfang]

Good to go. They are now in the Misc. Equipment. Forum.